Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 181
700327-11
– Remove screw with washer on the left and right side of the vehicle.
– Press the rear end up until the drill holes of the frame are level with the lower rear
drill holes of the frame rear.
– Fit the screw and washer on the left and right sides of the vehicle, and tighten.
Guideline
Screw, subframe M8 25Nm
(18.4lbfft)
Loctite
®
243™
700330-01
– Tighten the screw on the left and right sides of the vehicle.
Guideline
Screw, subframe M8 25Nm
(18.4lbfft)
Loctite
®
243™