KTM 1190 RC8 Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 169
Switch on the ignition by turning the black ignition key to the position .
EFI warning lamp (MIL) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up, switches off briefly, and switches
on again.
Switch off the ignition by turning the black ignition key to the position .
Remove the black ignition key.
Insert the orange programming key in the ignition lock.
Switch on the ignition by turning the orange programming key to the position .
EFI warning lamp (MIL) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up, switches off briefly, and flashes
according to the number of functioning black ignition keys including the orange
programming key. In this case, twice.
Switch off the ignition by turning the orange programming key to the position .
Pull out the orange programming key.
The lost black ignition key is deactivated.
The existing black ignition key is reactivated.
Loss of both black ignition keys (no black ignition key available):
Press the emergency OFF switch into the position .
Insert the orange programming key in the ignition lock.
Switch on the ignition by turning the orange programming key to the position .
EFI warning lamp (MIL) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up.
Switch off the ignition by turning the orange programming key to the position .