Kenwood DNX4250BT GPS Receiver User Manual


 
1010
Return to the Top page
Basic Operations
DNX525DAB
1
15 14 13
7
2
3
4
5
6
9
8
10
11
12
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX525DAB:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
1) Open the
8
microSD card slot cover
as the illustration in the right.
2) Hold the microSD card with the label side
facing right and the notched section down,
and insert it into the slot until it clicks.
To eject the card:
1) Push the card until it clicks and then remove
your finger from the card.
2) The card pops up so that you can pull it out
with your fingers.
NOTE
• When detaching a part of the front panel, detach it
toward the front side as shown in the diagram right. If it
is detached upward, the front panel will be broken.