Kenwood DNX4250BT GPS Receiver User Manual


 
102102
Return to the Top page
Controlling Audio
Zone Control
You can select different sources for both
front and rear positions in the vehicle.
1 Touch [Zone Control].
Zone Control screen appears.
2 Touch [Dual Zone].
3 Set each source as follows.
[3] (Front Source, Rear Source)
Select the audio source for each.
[], [5] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
• Output from the subwoofer
• Subwoofer Level/Bass Boost (P.100)
• Equalizer Control/Space Enhancer
/
Listening Position (P.100, 103, 105)
• DSP Bypass Control/Speaker Setup/Car Type
Setup (P.99, 97, 98)
• Different sources from iPod/iPhone (apps) cannot
be set as front source and rear source separately.
Only one source (app) can be set as front and
rear sources.