Kenwood DDX8024BT GPS Receiver User Manual


 
English 71
AV Input Setup
You can set AV input parameters.
Display the AV-IN Setup screen1
Touch [
] > [ ] > [AV-IN SETUP]. (page
59)
Set each item2
[AV-IN2 Interruption] Sets an image display
of the system that is connected via the AV
INPUT2 port. ( "OFF")
"OFF": When the image source is switched, an
image entered via the AV INPUT2 port
is displayed.
"ON": When an image signal is entered via the
AV INPUT2 port, this image is displayed.
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. (
"Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. (
"iPod")
[AV-IN1 Name], [AV-IN2 Name], [AV-IN3
Name] Sets a name to be displayed when
you select a system that is connected via the
AV INPUT port. (
"VIDEO")
[iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is unconnected.
[AV-IN Name]
Two AV-IN names are displayed when "iPod" is selected
in [iPod AV Interface Use] and three are displayed when
not selected.
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
Display the AV Interface screen1
Touch [ ] > [ ] > [AV Interface]. (page 59)
Set each item2
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. ( "AV-IN1")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": Switches to the rear camera video
display when "Reverse" gear is engaged,
and then pressing the [AUD] button for
more than 1 second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 61).
[R-CAM Mirror] You can flip the left and right
of the rear view camera video display. Set to
"ON" and the rear view will be displayed left
and right in mirror image on the screen.
(
"OFF")
When in DVD source, "AV-OUT" cannot be set to USB or
SD. When in USB source, "AV-OUT" cannot be set to DVD
or SD. When in SD source, "AV-OUT" cannot be set to DVD
or USB.