Kenwood DDX8024BT GPS Receiver User Manual


 
48 DNX9240BT/DDX8024BT/DDX8054BT
Hands Free Unit Control
Controlling Tone-based Services
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
Display the Talking screen1
See <Calling by Entering a Phone Number>
(page 46).
Display the DTMF input screen2
You can send tones during a call3
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
Display the Hands-Free Control screen1
See <Making a call> (page 45).
Display the Hands Free Setup screen2
Set each item3
[Auto Response] Sets an automatic response
time to pick-up an incoming call. ( "OFF")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Phone Voice] Sets the phone call voice /
ringing tone output position. (
"Front All")
"Front L": Outputs the phone call voice from
the front left-hand side speaker.
"Front R": Outputs the phone call voice from
the front right-hand side speaker.
"Front All": Outputs the phone call voice from
both front speakers.