Support User Manuals

Jackson PRO-9776 Remote Starter User Manual

Open as PDF

of 24

128-7857

2 of 24

2

To program these selectable features;

Action System Response

Turn ignition on No response

Press and release the valet switch 3 times 1 Chirp - LED 1 flash

Within 3 seconds, turn ignition Off Then On Short chirp, then long chirp

This Action Accesses Feature Bank 2 Alarm Selectable Features

First Press and release the valet switch 1 time 1 chirp = 1 second door lock & unlock

Press transmitter Lock button to change 2 chirps = 3.5 second door lock & Unlock

Press transmitter Lock button to change 3 chirps = 1 sec. lock, dbl 1 sec. unlock

Press transmitter Lock button to change 4 chirps = dbl 1 sec lock, 1 sec unlock

Press transmitter Lock button to change 5 chirps = dbl 1 sec lock, dbl 1 sec unlock

Press transmitter Lock button to change 6 chirps = 350mS unlock. 1 sec lock

or

Second Press and release the valet switch 2 chirps = auto locks off

Press transmitter Lock button to change 1 chirp = auto locks on

or

Third Press and release the valet switch 3 chirps = auto unlock off

Press transmitter Lock button to change 1 chirp = auto unlock drivers door only

Press transmitter Lock button to change 2 chirps = auto unlock all doors

or

Fourth Press and release the valet switch Non Functional On This Unit

or

Fifth Press and release the valet switch 2 chirps = active locks

Press transmitter Lock button to change 1 chirp = passive locks

or

Sixth Press and release the valet switch 2 chirps = active arming

Press transmitter Lock button to change 1 chirp = passive arming

or

Seventh Press and release the valet switch 1 chirp = siren and horn output

Press transmitter Lock button to change 2 chirps = siren output only

Press transmitter Lock button to change 3 chirps = horn output only

or

Eighth Press and release the valet switch 2 chirps = horn chirp output 16mS

Press transmitter Lock button to change 3 chirps = horn chirp output 30mS

Press transmitter Lock button to change 4 chirps = horn chirp output 40mS

Press transmitter Lock button to change 5 chirps = horn chirp output 50mS

Press transmitter Lock button to change 1 chirp = horn chirp output 10 mS

or

Ninth Press and release the valet switch 2 chirps = valet switch override operation

Press transmitter Lock button to change 1 chirp = custom code override operation

or

Tenth Press and release the valet switch 2 chirps = 2 step unlock off

Press transmitter Lock button to change 1 chirp = 2 step unlock on

or

Eleventh Press and release the valet switch 2 chirps = chirp delete from transmitter inactive

Press transmitter Lock button to change 1 chirp = chirp delete from transmitter active

or

Twelfth Press and release the valet switch Non Functional On This Unit

or

Thirteenth Press and release the valet switch Non Functional On This Unit

or

Fourteenth Press and release the valet switch Non Functional On This Unit

or

Fifteenth Press and release the valet switch 1 chirp = ch 5 pulsed output

Press transmitter Lock button to change 2 chirps = ch 5 output as long as button held

Press transmitter Lock button to change 3 chirps = ch 5-10 second output

Press transmitter Lock button to change 4 chirps = ch 5-20 second output

Press transmitter Lock button to change 5 chirps =ch 5 latch on/latch off output

Press transmitter Lock button to change 5 chirps = ch 6 hold 3 sec for pulsed output

or

Sixteenth Press and release the valet switch 1 chirp = ch 6 pulsed output

Press transmitter Lock button to change 2 chirps = ch 6 output as long as button held

Press transmitter Lock button to change 3 chirps = ch 6-10 second output

Press transmitter Lock button to change 4 chirps = ch 6-20 second output

Press transmitter Lock button to change 5 chirps =ch 6 latch on/latch off output

Press transmitter Lock button to change 5 chirps = ch 6 hold 3 sec for pulsed output

or

Seventeenth Press and release the valet switch 1 chirp = ch 7 pulsed output

Press transmitter Lock button to change 2 chirps = ch 7 output as long as button held

Press transmitter Lock button to change 3 chirps = ch 7-10 second output

Press transmitter Lock button to change 4 chirps = ch 7-20 second output

Press transmitter Lock button to change 5 chirps =ch 7 latch on/latch off output

Press transmitter Lock button to change 5 chirps = ch 7 hold 3 sec for pulsed output

or

Eighteenth Press and release the valet switch Non Functional On This Unit

or

Press and release the valet switch or turn the ignition off to: Exit Programming Mode

or

Turn ignition switch off then on to advance to feature Bank 3:

previous next