Filter
Top Products
To set cruising speed, accelerate your vehicle
to the desired speed, push the COAST/SET
switch and release it. (Vehicle ahead detection
indicator, set distance indicator and set vehicle
speed indicator come on.) Take your foot off the
accelerator pedal. Your vehicle will maintain the
set speed. The CRUISE indicator light in the
vehicle information display remains on.
The Intelligent Cruise Control system cannot be
set under the following conditions even if the
COAST/SET switch is pushed.
● When traveling outside the 25 to 89 MPH
(40 to 144 km/h) speed range.
● When the selector lever is not in the D
(Drive), 4, 3, 2, or 1 position.
● While the vehicle is being braked by the
driver.
● When pressing the ACCEL/RES switch
without there being a set speed in memory.
● When the windshield wipers are operating.
● When the parking brake is applied.
● When the Vehicle Dynamic Control (VDC)
system is switched off.
WSD0207
System set display with vehicle ahead
WSD0217
5-28 Starting and driving
੬ REVIEW COPY—
2010 Infiniti QX56 (iwz)
Owners Manual (owners)—USA_English (nna)
02/12/09—diane
੭