Filter
Top Products
Headlight beam select
᭺
1
To select the high beam function, push the
lever forward. The high beam lights come on
and the
light illuminates.
᭺
2
Pull the lever back to select the low beam.
᭺
3
Pulling and releasing the lever flashes the
headlight high beams on and off.
Battery saver system
If the ignition switch isplaced in the OFF position
while the headlight switch is in the
or position, the headlights will turn off after
5 minutes.
After theheadlights automaticallyturn off withthe
headlight switch in the
or position,
the headlights willilluminate again for5 minutes if
the headlightswitch ismoved tothe OFFposition
and then turned to the
or position.
CAUTION
Even though the battery saver feature au-
tomatically turns off the headlights after a
period of time, you should turn the head-
light switch to the OFF position when the
engine is not running to avoid discharging
the vehicle battery.
Headlight aiming control
Depending on the number of occupants in the
vehicle and the load it is carrying, the headlight
axis may be higher than desired. If the vehicle is
traveling on a hilly road, the headlights may di-
rectly hit the rearview mirror of the vehicle ahead
or the windshield of the oncoming vehicle. The
light axiscan be lowered withthe operation ofthe
switch.
The larger the number designated on the switch,
the lower the axis.
When traveling without a heavy load or on a flat
road, select position 0.
WIC1252 LIC0662
Instruments and controls 2-27
੬ REVIEW COPY—
2010 Infiniti QX56 (iwz)
Owners Manual (owners)—USA_English (nna)
02/12/09—diane
੭