Filter
Top Products
WARNING
● Do not use the HomeLinkா Universal
Transceiver with any garage door
opener that lacks safety stop and re-
verse features as required by federal
safety standards. (These standards be-
came effective for opener models
manufactured after April 1, 1982). A ga-
rage door opener which cannot detect
an object inthe path of aclosing garage
door and then automatically stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features in-
creases the risk of serious injury or
death.
● During the programming procedure
your garage door or security gate will
open and close (if the transmitter is
within range). Make sure that people or
objects are clear of the garage door,
gate, etc. that you are programming.
● Your vehicle’s engine should be turned
off while programming the HomeLinkா
Universal Transceiver.
PROGRAMMING HOMELINKா
1. To begin, press and hold the two outer
HomeLinkா buttons (to clear the memory)
until the indicator light
᭺
1
blinks (after 20
seconds). Release both buttons.
2. Position theend of thehand-held transmitter
1 - 3 inches (26 - 76 mm) away from the
HomeLinkா surface.
3. Using both hands, simultaneously press and
hold both theHomeLinkா button you wantto
program and the hand-held transmitter but-
ton.
DO NOTrelease the buttonsuntil step 4has
been completed.
4. Hold down both buttons until the indicator
light on the HomeLinkா flashes, changing
from a “slow blink” to a “rapidly flashing
blink”. This could take up to 90 seconds.
When theindicator light flashesrapidly,both
buttons may be released. The rapidly flash-
ing light indicates successful programming.
To activate the garage door or other pro-
WIC0986 WIC0987
Instruments and controls 2-55
੬ REVIEW COPY—
2010 Infiniti QX56 (iwz)
Owners Manual (owners)—USA_English (nna)
02/12/09—diane
੭