Filter
Top Products
3 - 17
for each read. The engine attempts to find and decode new symbols as long as
the trigger is pulled. When this programming selection is turned Off, the engine
will only read the symbol closest to the center of the image.
Default = Off.
No Read
With No Read turned On, the engine notifies you if a code cannot be read. If
using an EZConfig Tool Scan Data Window (see page 9-3), an “NR” appears
when a code cannot be read. If No Read is turned Off, the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message (see Data Formatting beginning on page 5-1).
The hex code for the No Read symbol is 9C.
On
* Off
On
* Off