Filter
Top Products
1 - 1
1
Getting Started
Introduction
The N86XX engine is designed for integration into a wide range of OEM
devices. The engine’s compact mechanical design can drop into many existing
applications, allowing OEMs and third-party manufacturers to integrate the ben-
efits of image-based scanning into a variety of devices, including hand held
computers (medical instrumentation, kiosks, diagnostic equipment, and robot-
ics.
Three different decoding configurations provide OEMs the flexibility required to
address various application-specific needs. The N8610/8613, with linear
decoding, delivers laser-like reading on linear codes. The N8680/8683 unit
decodes linear as well as 2D and postal codes. In addition to linear, 2D, and
postal codes, the N8690/8693 unit includes the OCR feature. For software
updates and additional information, visit the Honeywell website at
www.honeywellaidc.com.
About This Manual
This User’s Guide provides demonstration, installation, and programming
instructions for the N86XX engine. Dimensions, warranty, and customer sup-
port information are also included.
Honeywell’s bar code scanners are factory programmed for the most common
terminal and communications settings. If you need to change these settings,
programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the OEM engine(s), take the fol-
lowing steps:
• Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.