Filter
Top Products
1 - 3
Connecting the Development Engine to the PC
The development OEM engine can connect to a PC for evaluation.
Connecting with USB
Note: If using the N86XXX-XXX-XX5 engine with USB Micro-B, do not supply
power through the flex connector. Doing so may damage the host or
engine. The N86XXX-XXX-XX5 engine will only communicate USB
through the Micro-B connector. The N86XXX-XXX-XX3 engine will only
communicate USB through the 10 pin modular connector.
1. Turn off power to the terminal/computer.
2. If using full-speed USB, connect the USB interface cable to the
interface board and to the matching USB port on the computer.