Filter
Top Products
3 - 9
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
inside back cover, then scanning Save.
Illumination Lights
If you want the illumination lights on while reading a bar code, scan the Lights
On bar code, below. However, if you want to turn just the lights off, scan the
Lights Off bar code.
Default = Lights On.
Centering
Use Centering to narrow the engine’s field of view to make sure the engine
reads only those bar codes intended by the user. For instance, if multiple codes
are placed closely together, centering will insure that only the desired codes are
read.
In the example below, the gray area is the full engine field of view and the white
area is the centering window. Bar Code 1 will not be read, while Bar Code 2 will
be.
User-Specified Reread Delay
Lights Off
* Lights On
Bar Code 1
Bar Code 2