Filter
Top Products
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace a taillamp, turn signal lamp, stoplamp,
or back-up bulb, do the following:
1. Open the trunk or liftgate. See Trunk on
page 98 or Liftgate (Hatchback) on page 100
for more information.
2. Remove the two screws and the lamp
assembly.
3. Remove the bulb socket by turning it
counterclockwise.
4. Remove the bulb from the socket by pressing
the bulb and turning it counterclockwise.
5. Install the appropriate bulb into the socket.
6. Replace the bulb socket into the lamp
housing. Turn the bulb socket clockwise
to secure.
7. Reverse Step 2 to reinstall the lamp housing.
Hatchback
Sedan
316