Filter
Top Products
Unfolding the Seats
To return the rear seats to the normal seating
position, do the following:
1. Unclip the hook from the front seat head
restraint.
2. Remove the safety belt buckles and center
seat safety belt from the storage area.
Notice: Damage to the safety belt buckle or
rear seat locking mechanism can occur if the
safety belt and buckles are pinched under the
rear seat cushion. Do not place the safety belt
and buckles on the floor under the rear seat
cushion when the rear seat is put back to the
sitting position.
3. Push the seat cushion down to its original
position until it latches securely. Try to pull
up on the seat to make sure it is locked
in place.
4. Hook the safety belts in the outboard seating
positions into the retaining clips.
17