Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
• G Turn and Lane-Change Signals. See
Turn and Lane-Change Signals on page 137.
• 3 Headlamp High/Low-Beam Changer.
See Headlamp High/Low-Beam Changer on
page 138.
• Flash-to-Pass. See Flash-to-Pass on page 138.
• P Exterior Light Control. See Exterior Lamps
on page 145.
• - Fog Lamps, if equipped. See Fog Lamps on
page 147.
Turn and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
An arrow on the
instrument panel
cluster will flash in
the direction of the
turn or lane change.
To signal a lane change, just raise or lower
the lever until the arrow starts to flash. Hold it
there until you complete your lane change.
The lever will return by itself when you release it.
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and
other drivers will not see your turn signal.
Uplevel shown, Base similar
137