Filter
Top Products
Resuming a Set Speed
Suppose you set your cruise control at a desired
speed and then you apply the brake pedal, or
the clutch pedal if you have a manual transaxle.
This, of course, shuts off the cruise control.
But you do not need to reset it. Once you are
going about 24 mph (39 km/h) or more, you can
briefly press the RESUME button.
You will go right back up to your chosen speed
and stay there.
If you hold in the RESUME button longer, the
vehicle will keep going faster until you release the
button or apply the brake pedal. So unless you
want to go faster, do not hold in the RESUME
button.
Increasing Speed While Using Cruise
Control
There are two ways to go to a higher speed.
• Use the accelerator pedal to get to a higher
speed. Press the SET button, then release
the button and the accelerator pedal. You will
now cruise at the higher speed.
• Press the RESUME button. Hold it there until
you get up to the speed you want, and then
release the button. To increase your speed in
very small amounts, briefly press the RESUME
button and then release it. Each time you do
this, your vehicle will go about 1 mph (1.6 km/h)
faster.
The accelerate feature will only work after you turn
on the cruise control by pressing the SET button.
143