Filter
Top Products
Sounder Setup
The next sounder page menu option is Sounder Setup?. This option allows
you to setup the sounder for your specific needs. Five operational settings/func-
tions may be accessed: fish ID, water type, noise rejection, keel offset, and speed
calibration.
To access sounder setup:
1. Highlight the Sounder Setup? option and press
T
. The sounder setup page will
appear.
Fish ID
determines how the GPSMAP 185 Sounder identifies and labels
sonar targets on the viewing screen. Three settings are available:
Offis the default setting and shows all sonar target information as
arches.
Onshows small, medium, or large fish icons in place of arches
and displays other echo information (thermoclines, thin stumps,
etc.) as shades of gray.
Fish Onlyshows fish icons.
To select fish ID:
1. Highlight the Fish ID option and press
T
. The fish id submenu will appear.
2. Highlight the desired setting and press
T
.
Target DepthDisplays the digital depth of each fish icon.
Onshows fish icons with digital depth.
Offdoes not display depth.
To select target depth:
1. Use the
R
keypad to highlight the target depth field and press
T
. A corre-
sponding submenu will appear.
2. Highlight your submenu selection and press
T
.
A. The Off fish id setting is the default setting
and will display raw sonar data and show all
targets as arches.
B. The depth of each target is displayed by set-
ting the TARGET DEPTH field to On.
32
AB
SECTION
3
SOUNDER PAGE
Sounder Setup