Garmin GPSMAP 185 GPS Receiver User Manual


 
5
GETTING STARTED
Page Sequence/Position Page
The satellite status page is one of five main pages used in the GPSMAP 185
Sounders system. All five pages are linked together in a simple chain, which
allows you to scroll through the pages in either direction using the
J
and
Q
keys. To continue the tour, lets move on to the next page, the position page.
To scroll to the next page in sequence:
1. Press the
J
key.
The GPSMAP 185 Sounders position page shows where you are, what direction
youre heading and how fast youre going. The compass tape at the top of the page
indicates the direction youre moving. The four user-selectable data fields below
the compass tape show your current course and speed over ground, along with a
resettable trip odometer and depth display. Your current latitude and longitude,
along with a 12/24-hour clock, appear at the bottom of the page.
Now that youve seen how the status and position pages can be used to monitor
satellite acquisition and your present position, lets take a minute to learn how to
mark and store our present position as a waypoint. (Since were in simulator
mode, the present position displayed will be the last position calculated by the
receiver, which should be the spot where youve initialized the unit.) This will also
give you an opportunity to see how the GPSMAP 185 Sounders keypad and
T
key are used for data entry.
Compass
Tape
Data
Fields
Position
Coordinates
Time
of Day
Status Bar