Garmin GPS 12CX GPS Receiver User Manual


 
19
REFERENCE
Navigation
Pages
Selecting a Navigation Page
Once you’ve selected a GOTO destination or acti-
vated a TracBack, MOB, or route; the GPS 12CX will
provide graphic steering guidance to the destination with
one of two navigation pages:
• The Compass Page (default) provides a directional
pointer indicating the bearing to your destination
and a rotating compass ring which shows your di-
rection of travel (track) at the top of the ring. The
Compass Page provides better guidance for car
travel, hiking, or biking; where straight-line navi-
gation is often not possible.
• The Highway Page provides a graphic highway
display that shows your movement relative to the
desired course, with an emphasis on your cross
track error ( the distance and direction you are off
course). The cross track error (XTK) is depicted
on a course deviation indicator (CDI) (see pg. 40).
The Highway Page is well-suited for boating or
some types of off-road recreation where straight
line navigation is typically possible and maintain-
ing a specified course is desirable.
Both pages provide a digital display of the bearing
and distance to the destination, and your current speed
and track over the ground. You can switch to either
Navigation Page at any time.
To select either Navigation Page:
1. Press
ENTER
from the existing Navigation Page, and
ENTER
again to change the page.
Highway PageHighway Page
Highway PageHighway Page
Highway Page
Compass PageCompass Page
Compass PageCompass Page
Compass Page
To switch from the Compass Page
to the Highway Page, press
ENTER
twice.
To switch from the Highway Page
to the Compass Page, press
ENTER
twice.