Filter
Top Products
44
GPS Navigation
Tones Setup
The Tones Setup Page allows you to customize the signal tones for a
variety of unit features.
To change or mute tones:
1. From the Setup Menu, highlight ‘Tones’ and press ENTER.
2. Use the
ROCKER key to highlight the tone you want to change and
press ENTER. As you scroll down the list of tones, you will hear an
example of each tone. Choose the tone you want to hear and press
ENTER. To mute all tones, highlight ‘Mute’ and press ENTER.
Page Sequence Setup
The Page Sequence Setup Page allows you to reorder any of the Main
Pages and add additional pages to the Main Page cycle. If you add a page
to the sequence, it no longer appears in the Main Menu.
To move, insert, or remove a page:
1. From the Setup Menu, highlight ‘Page Sequence’ and press ENTER.
2. To move a page in the order, highlight the page and press
ENTER.
Select ‘Move,’ then move Up or Down until the desired position is
displayed and press ENTER.
3. To insert a new page, highlight the page after the point where you
want to insert and press
ENTER. Select ‘Insert,’ then choose a page
from the displayed list and press ENTER.
4. To remove a page, highlight the page and press
ENTER. Select
‘Remove’ and press ENTER.
The Setup Menu
Choose from nineteen different tones for each field, or choose
‘Off’ to turn the tone off for that field.