Filter
Top Products
32
GPS Navigation
To use the TracBack feature:
1. From the Tracks Page or Saved Tracks Page, highlight ‘TracBack’ and
press ENTER.
2. Select the point you want to TracBack to by using the
ROCKER key
to move the Panning Arrow on the map. Then press
ENTER to start
navigating the TracBack.
3. When the TracBack Navigation Page appears, directions to the
first turn on the track appear at the top of the page. Move in the
direction of the first turn. When you reach the first turn, the display
will provide direction to the next turn, and so on, until you have
reached your destination.
4. To exit TracBack, press the
MENU key and select ‘Stop Navigation.’
To create a waypoint on a Saved Track:
1. From the Tracks Page, highlight a saved track and press ENTER. Then
highlight ‘Map’ and press
ENTER.
2. Use the
ROCKER key to move the Panning Arrow to the point you
want to mark as a waypoint. Press ENTER, select ‘Yes,’ and press
ENTER again to display the Mark Waypoint Page.
2. Customize the user waypoint if desired (see p. 16). Then highlight
‘OK’ and press ENTER to save.
Tracks
Select the point you want to TracBack to and then press
ENTER to begin navigating your track in reverse.