Filter
Top Products
GPS Navigation
41
GPS Navigation
Display Setup
The Display Setup Page allows you to set backlight timeout, bright-
ness level and display contrast. You can also change the brightness and
contrast levels by pressing and releasing the POWER key. For instruc-
tions on changing backlight levels, and contrast, see p. 6.
Interface Setup
The Interface Setup Page allows you to control the input/output
format used when connecting your unit to a computer, external NMEA
device, DGPS beacon receiver, or other device using a USB or Serial Port
Cable.
The following settings are available:
GARMIN—The proprietary format used to exchange waypoint, route,
track log, and MapSource data with a PC. Use this option when trans-
ferring data with MapSource software.
GARMIN DGPS—The proprietary format used with a Garmin differ-
ential beacon receiver (e.g., GBR 21). Allows you to tune the beacon
receiver directly from the GPS 60.
The Setup Menu