Filter
Top Products
GPS Navigation
16
GPS Navigation
Creating Waypoints
A waypoint is any point on the Map Page that you store in memory.
You can mark (create) a waypoint at your current location or at another
location on the map. The GPS 60 automatically saves waypoints so you
can view them at any time on the Map Page.
To mark a waypoint at your current location:
1. Press the MARK key from any page. The Mark Waypoint Page
appears.
2. To change the name of the waypoint, use the
ROCKER key to
highlight the ‘Name’ field and press
ENTER to display the on-screen
keypad. Use the ROCKER and ENTER keys to select a name for
the waypoint. If you choose a name that has already been used,
a ‘Waypoint Already Exits’ message appears. Press
ENTER to
acknowledge and choose a new name.
3. To assign an identifying symbol to a waypoint, use the
ROCKER key
to highlight the ‘Symbol’ field and press ENTER. Choose a symbol
from the menu and press ENTER.
4. To save the waypoint, highlight ‘OK’ and press
ENTER. If you do not
want to save the waypoint, press the
QUIT button to exit.
Waypoints
MARK
Press the MARK key to create a waypoint
at your current location. The waypoint
appears on the Map Page with a name and
The Mark Waypoint Page
‘Name’
field
‘Symbol’
field
Shows when
waypoint was
created.
Select to view
waypoint on
Map Page.
Select to save
waypoint and
exit.
Select to
average
waypoint