Filter
Top Products
nüvi 900 Series Owner’s Manual 53
Appendix
Mounting on Your
Dashboard
Use the enclosed mounting disk to
mount your unit to the dashboard and
comply with certain state regulations.
CAUTION: The permanent
mounting adhesive is extremely
difcult to remove after it is installed.
1. Clean and dry the dashboard where
you are placing the disk.
2. Remove the backing from the
adhesive on the bottom of the disk.
3. Place the disk on the dashboard.
4. Remove the clear plastic cover from
the top of the disk.
5. Place the suction cup mount on top of
the disk. Flip the lever down (toward
the disk).
Additional Maps
You can purchase additional MapSource
map data from Garmin and load the
maps in your nüvi internal memory or on
an optional SD card.
To determine the versions of the maps
that are loaded on your nüvi, open the
Menu page. Touch Tools > Settings
> Map > Map Info. Check
www.garmin.com/unlock/update.jsp to
see if an update for your map software
is available. To enable additional maps,
you need your unit ID (see page 41) and
serial number (located under the battery).
To load maps, routes, or waypoints in
your nüvi memory or on your SD card,
select the name for your nüvi drive or
SD card drive. Refer to the MapSource
Help le for more information.