Filter
Top Products
nüvi 900 Series Owner’s Manual 7
Getting Started
Adding a Stop
You can add a stop (called a Via Point)
to your route. The nüvi gives you
directions to the Via Point and then to
your nal destination.
1. With a route active, touch Menu >
Where to?.
2. Search for the extra stop.
3. Touch Go!.
4. Touch Add as Via Point to add this
stop before your destination. Touch
Set as new Destination to make this
your new nal destination.
Taking a Detour
1. With a route active, touch Menu.
2. Touch Detour.
The nüvi attempts to get you back
on your original route as quickly as
possible. If the route you are currently
taking is the only reasonable option, the
nüvi might not calculate a detour.
Stopping the Route
1. With a route active, touch Menu.
2. Touch Stop.
Adjusting the Volume
From the Menu page, touch Volume.
Touch and to adjust the master
volume. Touch the box next to Mute to
mute all audio.
To adjust the volume levels for the voice
prompts, the media players, and the
phone, touch Mixer. Adjust the levels
as needed. Touch Restore to return the
volume settings to the original levels.
Locking the Screen
To prevent accidental screen touches,
slide the Power key to the right ( ). To
unlock the screen, slide the Power key
to the center position.