Garmin 900 Series GPS Receiver User Manual


 
38 nüvi 900 Series Owner’s Manual
Using FM Trafc
Using FM Trafc
The trafc receiver is included in some
nüvi packages. The FM trafc receiver is
integrated in the vehicle power cable.
Use an FM TMC (Trafc Message
Channel) trafc receiver to receive
trafc information that is broadcast over
the FM Radio Data System.
For information about FM trafc
receivers and coverage areas, see
www.garmin.com/trafc.
NOTE: Garmin is not responsible for
the accuracy of the trafc information.
The FM trafc receiver receives
signals from the trafc service
provider and displays that information
on your nüvi.
NOTE: The FM trafc receiver and
the nüvi must be in data range of an
FM station transmitting TMC data to
receive trafc information.
To power connector
on nüvi cradle
To power outlet
in vehicle
Power
LED
Status
LED
Antenna
(suction cups
not shown)
LED Blink Codes
The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
Yellow dot-dash ashes
determining which country you are
currently in.
Yellow solid—searching for signal.
Red solid
—momentary sync loss.
Green solid
—normal trafc data.