Filter
Top Products
6 GPSMAP 198C Sounder Owner’s Manual
BASIC OPERATION > ENTERING DATA AND SELECTING OPTIONS
Entering Data and Selecting Options
You can select and start options, and enter data to customize the
GPSMAP 198C Sounder to fit your requirements. Use the ENTER
key and the ROCKER to select options, enter names and numbers
in data fields, and start your selections.
To select an optional feature:
1. With any page shown, press MENU to show the options
menu. The options menu shows a list of optional features
that are specific for that page. To select an option requires
movement of the cursor. This is referred to as highlighting,
selecting, or choosing an item.
2. Use the ROCKER to move the cursor (highlight) up and
down a list or up, down, left, and right on menus.
3. After you have highlighted a selection, press ENTER to
either start the feature or press MENU to show a sub-menu
or list with more options. Repeat this process to select an
option from the list, or press QUIT to return to the previous
setting.
To select an on-screen button:
Some pages contain on-screen buttons. As shown below,
the New Waypoint Page has three buttons: Map, Delete,
and OK. To start, highlight the a button, and press ENTER.
On-Screen Buttons