Furuno FR-8062, FR-8122, FR-8252 Radar Detector User Manual


 
5. GPS OPERATION
5-5
5.6 GPS Sensor Installation Position Offset
The installation position of the GPS sensor antenna and the radar antenna must be the same in
order to get accurate position information on the radar. If they are different, measure the distance
between the GPS sensor antenna and the radar antenna, in the bow/stern and/or port/starboard
direction, and enter those distances in the menu as follows:
1. Press the MENU key to show the menu.
2. Choose GPS and press the ENTER key.
3. Choose Forward Offset (bow or stern offset) or Right Offset (port or starboard offset), the direc-
tion of the offset, and press the ENTER key.
4. Measure the distance from the GPS sensor position to the radar antenna and use the trackball
to set value. Enter a “+” value for bow direction or port direction offset; a “-” value for stern
direction or starboard direction offset.
5. Press the ENTER key
6. Press the MENU key to close the menu.
+ 0m
(-999m-+999m)