Filter
Top Products
4-1
4. AIS OPERATION
Connected to the FURUNO AIS Transponder FA-150, the FR-8xx2 series can show the name,
position and other nav data of the nearest 100 AIS transponder-equipped ships. (For connection
of other makes of AIS transponders, AIS Interface IF-1500AIS (option) is required.)
This radar accepts position data fixed by WGS-84 geodetic datum. Set the datum to WGS-84 on
the GPS navigator connected to this radar. If this radar is interfaced with the FURUNO GPS Nav-
igator GP-320B, see paragraph 5.2 for the procedure. Additionally, confirm that Mode on the GPS
menu is set to GPS or WAAS, referring to page 5-1. The AIS function is inoperative if the mode is
DGPS.
4.1 Controls for Use with AIS
ENTER: Press, after choosing target with the trackball, to display data for selected active AIS
target (in the data box at the bottom of the screen).
CANCEL/HL OFF: Remove data of cursor-selected AIS target from the data box.
MENU: Access the Target and AIS menus for AIS operations.
Trackball: Choose active target to display its data.
4.2 Turning the AIS Display On or Off
You may turn the AIS display on or off. The system continues processing AIS targets regardless
of whether the AIS display is on or off, provided the AIS transponder is turned on.
1. Press the MENU key to display the main menu.
2. Choose AIS and press the ENTER key.
AIS menu
3. Choose DIsplay and press the ENTER key.
4. Choose Off (all AIS symbols are erased) or On (all AIS-received targets are displayed) as
appropriate and press the ENTER key.
5. Press the MENU key to close the menu.
Brill/Color
Echo
Mark
Target Trails
Custom 1
Display
Custom 2
Custom 3
Menu
AIS
AIS
Display : Off
Symbol Color : Green
Range : 24.0nm
Sector Start : 340
°
Sector End : 20°
Sort By : Range
Number of Targets : 30
[ENTER]: Enter [CANCEL/HL OFF]: Back
[MENU]: Exit
Tuning
GPS
Target
ARP
AIS
System
GPS Buoy