Filter
Top Products
L1114pr-0920
®
3
4
1
23
H
L1114pr-0920
BATTERY INSTALLATION
2
• Locate the lock fasteners in the back end of the seat.
• Using a slotted screwdriver, turn the lock fasteners
1
/4 turn to the
unlocked position .
Unlocked
Lock
Fasteners
Seat
• Lift the seat to remove it from the vehicle.
Seat
• While pressing the vehicle tab, lift the
edge of the battery retainer.
• Place a Power Wheels
®
6 volt battery
upright in the battery compartment, as shown.
Battery
Retainer
Battery
Compartment
®
Battery
Retainer
®
• Rotate the battery retainer down until it "snaps" into place. Pull up
on the battery retainer to be sure it is secure.
IMPORTANT! Use only a Power Wheels
®
6 volt Type H battery
and built-in thermal fuse. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least
18 hours using the enclosed Power Wheels
®
6 volt Type H charger
before operating your vehicle for the first time. Charge the battery
for at least 14 hours after each use of the vehicle. Never charge the
battery longer than 30 hours. Failure to follow these instructions may
damage your battery and will void your warranty.
Battery
Battery
Retainer