Filter
Top Products
38
37
20
ASSEMBLY
F
L1114pr-0920
• Turn the vehicle on its side, so that the
bottom faces you.
• Position the steering bracket behind the steering linkage, as shown.
• Fit the steering column through the hole in the steering bracket to
the second bend.
Steering
Bracket
Steering
Column
2nd Bend
Steering
Linkage
Steering
Bracket
• Fit the end of the steering column
through the hole in the steering
linkage
A
.
• Turn the steering bracket and fit it into place
B
.
Steering
Bracket
Steering
Column
Steering
Linkage
A
B
• Insert a #10 x
3
/4" trusshead screw through
the front end of the vehicle and through
the hole in the bracket.
• Attach a lock nut to the end of the trusshead screw.
• While holding the lock nut in place with an adjustable wrench, tighten
the screw with a Phillips screwdriver. Do not over-tighten.
#10 x
3
/4"
Trusshead
Screw
Lock Nut
39
Screw
Lock Nut
• Turn the vehicle upright.
• Fit the steering wheel cap into the center of the steering wheel.
• Insert two #6 x 1" screws through the steering wheel cap and into the
steering wheel. Tighten the screws.
Steering Wheel Cap
Steering
Wheel
TOP VIEW
40