Filter
Top Products
Assembly
30
Tabs
Tab
Left Headlight Lens
• Using safety scissors, remove the
headlight lenses from the plastic
connector. Dispose of the plastic
connector.
• Align the tabs on the back of the
right and left headlight lenses
with the slots in the grille.
Please Note: The right and left
headlight lenses are NOT inter-
changeable.
• Press firmly to snap the headlight
lenses into the grille.
T
M
• Face the front of the vehicle.
• Insert the two tabs at the top of
the grille into the slots in the front
of the vehicle body.
• Press firmly to snap the tabs into
the slots.
• Fit the two side tabs on the grille
into the grille openings in the front
of the vehicle body.
• Press firmly at the bottom of the
grille to snap the two tabs at the
bottom of the grille into the vehi-
cle body.
31
32
Please Note: For your convenience,
the airscoop has been pre-assem-
bled. If the airscoop has separated
into two pieces during shipment,
snap the “C” clips on the top half
of the airscoop onto the hinge bar
on the bottom half of the airscoop.
Then, snap the front tab on the top
half into the slot in the bottom half.
• Align the tab on the back of the
airscoop with the notch in the
hood opening and fit the
airscoop into the center of the
hood.
• Press firmly to snap the airscoop
into the hood.
Right Headlight Lens
Grille
Tabs
Grille
Grille Opening
Side Tab
Grille Opening
Slots
Airscoop
Hood
Tab
Notch
Opening
23