Filter
Top Products
Assembly
• Hold the steering column in
place and gently lower the
vehicle body.
• Position the steering wheel so
that the spokes form a “Y” as
shown.
• While supporting the steering
column, fit the steering wheel
onto the steering column.
• Fit a cap nut onto the end of the
steering column.
• Tap the cap nut with a hammer
to secure it on the steering
column.
9
“UP”
14
Steering Wheel
Cap Nut
• Align the tab on the steering
wheel cap with the slot in the
center of the steering wheel.
• Fit the steering wheel cap into the
center of the steering wheel.
• Insert two #8 x 1" screws into the
steering wheel cap.
• Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
10
Steering
Wheel Cap
#8 x 1" Screw – 2
Shown Actual Size
Steering Column
• Fit a cap nut onto the end of the
steering column.
• While supporting the steering
column, tap the cap nut with a
hammer to secure it on the
steering column.
8
Front Axle
Cap Nut
Bottom View