Filter
Top Products
Assembly
18
• Slide the assembled sport bar
lights onto the light rack with the
lenses facing away from the
hinge.
• Fit a
3
/
16
" washer onto each of two
#8 x 1" screws.
• Insert the #8 x 1" screws with
washers up through the light rack
and into the sport bar lights as
shown.
• Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
#8 x 1" Screw – 2
3
/
16
" Washer – 2
Lenses
Light
Light Rack
Hinge
19
• Position the sport bar on its side,
with the ends curving away from
you.
• Slide the loop at the end of the
long seat belt strap onto the
center section of the sport bar.
Please Note: Make sure that the
side of the seat belt strap with the
fastener is facing away from you
and that the seat belt strap is not
twisted.
18
Long Seat Belt Strap
Sport Bar
Both Shown Actual Size