Filter
Top Products
Assembly
Do Not Omit Any Steps. Please set aside at least 45 minutes for assembly.
• Locate the sound box battery
compartment.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. The screw will remain
in the door.
• Lift the battery compartment
door open.
• Insert three size LR6 “AA” alkaline
batteries into the battery com-
partment as indicated on the
battery compartment door.
• Close the battery compartment
door.
• Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• Place the sound box into the dash
pocket in the vehicle body,
speaker side down.
1
2
11
G
Battery Compartment
Battery
Compartment
Door
IMPORTANT NOTES:
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Battery
leakage and corrosion can damage the product.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the battery installation instructions are
to be used.
• If removeable rechargeable batteries are used, they are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the product before they are charged.
• Battery chargers used with the product must be examined regularly for damage to the cord, plug enclosure
and other parts. In the event that such damage is found, the product must not be used with the battery
charger until the damage has been repaired.
+
-
Sound Box
Sound Box
Speaker Side
Dash Pocket
SHOWN ACTUAL SIZE
LR6 “AA”
1.5 x 3