6
XNAV9525 GPS NAVIGATION SYSTEM
Installation - Main Unit
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the main unit where it would be subject to high temperatures, such as
from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
• Stand alone installations require an external video monitor, power, signal and speaker
wires (not included).
• Use extreme caution when drilling holes to avoid damaging fuel lines or existing vehicle
wiring.
Mounting Location
• Choose a mounting location for the main unit. Suggested locations include under a seat
or in the trunk.
• The unit can be mounted horizontal (recommended) or vertical. For optimum
performance, make sure to provide at least 1" of space to around all sides. Do not
mount the unit under carpets or where airflow is restricted.
• Do not install the unit where it may be exposed to moisture.
• The optimum mounting location varies between vehicles. Remember to test all
functions before completing the final mounting procedure.
Typical Mounting