Filter
Top Products
27
XNAV9525 GPS NAVIGATION SYSTEM
Data Manager - Browse/Copy Files
Browse folders/files by moving the yellow cursor using the
▲▼◀▶buttons. Highlight desired folder or file and press
ENTER to select. Folders with sub folders are displayed in
the same window. Press F1 to go up one folder level. Press
the ◀▶buttons to move between the left and right side
windows.
Folder/file copy allows you to copy folders/files from one
place to another. Only the selected folders or files in the
left side window will be copied to the selected folder in the
right side window. Select the target folder/files to be copied
in the left side window. Select the destination folder in the
right side window. Press F2 to begin copying the selected
folder or file. Several folders/files may be selected at one
time by pressing F5. As shown below, 4 MP3 files have been
selected for copy from Hard Disk4 (external USB storage
device) to the Mdata folder located on Hard Disk3.
The copy progress box indicates the status of folder/file
process. As the copy function completes, the progress box
disappears automatically and the copied folders/files are
displayed in the right side window as the result. Press ESC
to cancel the copy function during folder/file copy process.
Browse Folders/Files
Copy Folder/Files
Data Manager
Multiple File Select
Data Manager
Folder/File Copy Progress
Note
Any device
plugged into the
USB port will
show up in the
Data Manager
as “Hard Disk 4”.
Hard Disk 4 can
not be renamed.