Filter
Top Products
HY13-1518-M1/USA
Low Speed High Torque, Hydraulic Motors
TK Series
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37745 USA
Hydraulics
8
• Clean, petroleum-based solvent
• Emery paper
• Vise with soft jaws
• Air pressure source
• Arbor press
• Screw driver
• Masking tape
• Breaker bar
• Torque wrench-ft. lbs. (N m)
• Sockets: 1/2 or 9/16 inch thin wall, 1 inch
• Allen Sockets: 3/16, 3/8 inch
• Adjustable crescent wrench or hose fitting wrenches
• SAE 10W40 SE or SF oil
• Special bearing mandrel for TK Torqmotor (SEE FIGURE 1)
• Feeler gage .005 inch (.13 mm)
• TK Torqmotor requires blind hole bearing puller for a 1.750 inch dia. (44.45 mm) and 2.750 inch dia. (69.85 mm)
bearings.
• Clean corrosion resistant grease. Part #406018 is included in each seal kit. Recommended grease is Parker
Specification #045236 or Mobil Mobilith SHC
®
460
NOTE: The available service seal kits include the recommended grease as a grease pack #406018
CAUTION: Mixing greases that have different bases can be detrimental to bearing life.
Tools and Materials Required for Servicing