Filter
Top Products
HY13-1518-M1/USA
Low Speed High Torque, Hydraulic Motors
TK Series
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37745 USA
Hydraulics
11
EXPLODED VIEW
ITEM # 14 14a 14b
COUPLING
DESCRIPTION SHAFT KEY NUT
32-1-1/2" Straight Key TK019002 039040
36-17 Tooth Spline TK019003
63-1-3/4" Tapered Shaft TK019001 039049 025133
64-40mm Straight Key TK019004 039050
For reverse timed manifold, use TK015001.
Standard seal kit SK000167 includes five #032807 seal rings, #032852 commutator seal, #032850
inner seal, #028549, #032851 backup washer, backup ring, #478082 dirt & water seal, #406018
grease pack and bulletin #050034.
EXPLODED VIEW
ITEM # 3 4 16
COMMUTATOR SEAL INNER
DESCRIPTION SEAL RING (5) SEAL
AAAA Black Paint 032852 032807 032850
OPTION GROUP
Service Parts List Chart
Chart Use Example:
TK0200K5320AAAB Torqmotor includes part numbers listed to the right of TK (SERIES), 0200 (DISP.), K (MOUNTING), 5 (PORTING),
32 (SHAFT), 0 (ROTATION), and AAAB (OPTION) shown in the left hand column of the chart.
Caution:
The charted component service information is for the Torqmotors listed only. Refer to the original equipment manufacturer of the equipment
using the Torqmotor for assembly numbers not listed below.
EXPLODED VIEW
ITEM # 4 6 10 13 15 16 17 19 20 22 23
MANIFOLD WEAR THRUST INNER THRUST THRUST BACKUP BACKUP OUTER DIRT & WATER
DESCRIPTION COMMUTATOR (SEE NOTE) PLATE BEARING BEARING WASHER(2) BEARING WASHER RING BEARING SEAL
TK-Service Part # TK014000 TK015000 477983 070029 073007 069033 (2) 070028 028549 032851 070027 478082
SERIES
EXPLODED VIEW
ITEM # 21
SERVICE HOUSING
DESCRIPTION HOUSING ASSEMBLY
K - SAE CC (4 Bolt) TK012002 TK012002A1
T - Wheel Mt. (4 Bolt) TK012001 TK012001A1
EXPLODED VIEW
ITEM # 2
END
DESCRIPTION COVER
5 - Rear Port (1 5/16" O-Ring; Radial) TK016000
4 - Rear Port (Manifold; Radial) TK016001
Mounting Code
REAR HOUSING*
FRONT HOUSING
Porting Code
COUPLING SHAFT GROUP
EXPLODED VIEW
ITEM # 1 8 11
DISPLACEMENT STATOR ROTOR DRIVE DRIVE LINK
(in
3
/rev) BOLT (7) THICKNESS SET LINK L DIM
0200-12.2 021472 .6882 TK02007003 TK02003000 5.520
0250-15.3 021378 .8601 TK02507003 TK02503000 5.692
0315-19.2 021366 1.0836 TK03157003 TK03153000 5.916
0400-24.4 021394 1.3761 TK04007003 TK04003000 6.209
0500-30.5 021473 1.7199 TK05007003 TK05003000 6.553
0630-38.4 021474 2.1668 TK06307003 TK06303000 7.000
0800-48.8 021388 2.7522 TK08007003 TK08003000 7.585
1000-61.0 021475 3.4398 TK10007003 TK10003000 8.273
DISPLACEMENT GROUP
*TK Series Motors only available in rear ported option.
Shaft Code