Filter
Top Products
8
Connections (continued)
Included with the DCS-5300G is an infrared remote control. You have the option
of controlling the camera via the Pan/Tilt Controls using the IP surveillance
software, Internet Explorer, or via the infrared remote. To use the remote, make
sure that IR Control is enabled on the Camera Control page in the Configuration
Menu under Advanced. Please refer to the section titled “Using the
DCS-5300G with an Internet Browser” in this manual for more
information.
Infrared Remote Control
Stop
Auto-Patrol
Auto-Pan
Center
Home
Arrows
Arrows
Use the Up, Down, Left and Right arrows to tilt/
navigate the camera lens.
Home Returns the camera lens to the home position set
by the user.
Auto-Patrol
Enables the Auto-Patrol function.
Auto-Pan
Center
Centers the camera lens.
Pans the camera one full cycle.
Stop
Stops the movement of the camera during pan.