Filter
Top Products
41
Using the DCS-5300G with an Internet
browser (continued)
Configuration > Advanced >Network Settings (continued)
Channel - The default wireless channel setting is channel
6. Select the channel that is the same as the other
wireless devices on your network.
TX Rate- Select the transmission rate on the network.
Auto is the default setting.
Preamble- Select Long or Short Preamble. The Preamble
defines the length of the CRC block (Cyclic
Redundancy Check is a common technique for
detecting data transmission errors) for
communication between the Access Point and
the roaming wireless Network adapters. Long
Preamble is the default setting. Note: High
network traffic areas should use the shorter
preamble type.
Data Encryption - Enable Encryption by clicking on the box. The
DCS-5300G has Encryption disabled as the
default setting.
Auth mode - Choose one of the following authorization
modes:
Open Authentication - Communicates the key across the network.
Shared Authentication - Allows communication only with other devices
with identical WEP settings.
Auto - Will automatically adjust to the Authentication
mode of the wireless client.
Key type - Select the key length, either 64 or 128 bits.
Key Format - Select an ASCII or hexadecimal key format.
Key Index - You can create up to 4 different security keys.
Click Apply to make
changes effective