Filter
Top Products
© 1999 Directed Electronics, Inc.Vista, CA 9
N430 9/99
WIRE CONNECTION GUIDE
H1/1 ORANGE
(-) ground-when-armed output: This wire supplies a (-) 500 mA ground as long as the system is
armed. This output ceases as soon as the system is disarmed.This wire is used to control the optional 8618 starter
kill relay. The 8617 relay assembly may also be used as shown in the diagram below.
NOTE: If connecting the orange wire to control another module, such as a 529T or 530T window controller,
a 1 amp diode (type 1N4004) will be required. Insert the diode as shown below.
IMPORTANT! Never interrupt any wire other than the starter wire.
H1/2 WHITE
(+) light flash output: This wire should be connected to the (+) parking light wire, as described in the
“Finding the wires you need” section of this manual.This output is protected with a 7.5 amp fuse. Never increase the
value of the light flash fuse. If more current is required, use an external relay.