Filter
Top Products
2 © 1999 Directed Electronics, Inc.Vista, CA
N430 9/99
Do not disconnect the battery if the vehicle has an anti-theft-coded radio. If equipped with an air bag, avoid discon-
necting the battery if possible.
IMPORTANT! Many airbag systems will display a diagnostic code through their warning light after they lose
power. Disconnecting the battery requires this code to be erased, a procedure that can require a trip to the
dealer.
Before beginning the installation:
• Check with the customer on Status LED location.
• Remove the domelight fuse.This prevents accidentally draining the battery.
• Roll down a window to avoid being locked out of the car.
After the install:
• Test all functions.The "Using Your System" section of the Owner's Guide is very helpful when testing.
• When testing, don’t forget that this system is equipped with Nuisance Prevention
®
Circuitry. NPC
™
can
bypass trigger zones, making them appear to stop working. (See page 21)
Two 471T
remote
transmitters
514N
Revenger
®
Soft Chirp
®
siren
Plug-in
Status LED
Plug-in
Valet
®
/Program
switch
INSTALLATION POINTS TO REMEMBER
Primary
harness
H1
3-pin
2-wire
door
lock
harness
504D Plug-in
Stinger
®
shock
sensor
2-pin
mini
blue
Valet
®
/
Program
plug
2-pin
micro
LED
plug
4-pin shock
sensor plug