Filter
Top Products
4
© 2004 directed electronics, inc.
system maintenance
This system needs no specific maintenance beyond 2-way remote
control battery replacement. The 2-way remote is powered by a 1.5V
AAA battery.
Low Battery Notification
If the battery is low (and this feature is programmed On) the 2-way
remote will emit 2 long beeps 5-seconds after a transmission is
completed. The 2 long beeps will repeat every 25seconds up to 3 times
(or until a 2-way remote button is pressed).
Battery Replacement
Gently pull the end of the battery door away from the top of the remote
control then slide the door up to expose the battery and remove the
expired battery. Place the new battery into the remote control observing
the correct polarity. When power is returned the remote control will
light all icons and generate melodies (representing all beeper tones).
your warranty
Your warranty registration must be returned and the bar code serial
number must not be removed. If the warranty registration is not
returned, you do not have a warranty. It is also necessary to keep your
proof of purchase, which reflects that the product was installed by an
authorized dealer. Make sure that you receive the warranty registration
from your dealer.
➜
➜