Directed Electronics 120XV Automobile Alarm User Manual


 
15
© 2004 directed electronics, inc.
1. If a sensor triggered the system, the remote will beep 4-times and
the Orange and Red LEDs flash 3 times.
2. If a switch (Zone 1, 3, 5, or 6) triggered the system, the remote
will beep 4-times, the Orange LED will flash 6-times and Red LED
will illuminate for 3 seconds.
3. If the system was triggered so many times that NPC is active the
remote will emit the above notifications with 5 beeps instead of
4.
high security disarm
This system includes High Security Disarm feature. If the system is trig-
gered this feature allows the user to silence the siren and reset the
system to the armed state without having to visually checking the
system status.
After receiving an alarm page:
1. First press any button on the remote to clear the alarm page.
2. Press either the or button again and the High Security
disarm feature will be activated. The siren will be silenced and the
system will reset to the armed state.
3. Pressing the button once more will fully disarm the system
and allow the vehicle to be accessed.