Filter
Top Products
17
© 2004 directed electronics, inc.
The remote will indicate disarm notification with 2 beeps and 3 flashes
of the Orange LED.
silent mode
To temporarily turn off the arm or disarm chirps, use Silent Mode™.
Simply press for less than one second before arming or disarming,
and the confirmation chirp(s) will be eliminated for that one operation
only. If you want the arm/disarm chirps turned off permanently, your
dealer can do this for you.
The remote responds with the normal arm/disarm notifications in
silent mode. (If the remote has beeps programmed On, the remote will
beep.)
NOTE: The Warn Away® response to lighter impacts is bypassed if
the system is armed using Silent Mode. This ensures that no chirps
will be emitted by the siren in an area you want chirp-free. The sys-
tem is still fully capable of triggering. Only the Warn Away®
response is bypassed.
➜
important! The unit can be programmed to respond to one to
five pulses of the Valet
®
button for the disarm function. Be sure
to check with the installer for the desired programming.