Filter
Top Products
Deepstor
User Instructions
ISSUE 1 User Instruction
AUGUST 2003 Page 25
DAMAGE INSPECTION – TOP / BACK BRACING & FIXING
Fixing
Missing: Replace immediately
Damage to fixing; Damage to M10 x 25 Gr 8.8 Nut and Bolt by shearing, replace the
fixing immediately. When damage of fixing occurs, most likely
either the upright slots or hole on the brace or both are badly
damaged. A replacement of damaged brace and upright is
recommended.
Brace
Looseness; Due to slight impacts or movement of the rack over a period, the
brace can become loose. If there is no damage in ether the hole or
the brace re-adjust the brace and tighten the fixing. Ensure that the
rack is plumb.
Damage: Tearing of the fixing holes or other damage due to pallet placement
(e.g. a permanent kink in the brace) requires replacement of the
brace.