Filter
Top Products
Deepstor
User Instructions
ISSUE 1 User Instruction
AUGUST 2003 Page 23
DAMAGE INSPECTION – PALLET RAIL
Fixing
Missing: Replace immediately
Damage to fixing; Damage to M6 Nut and Bolt by shearing, replace the fixing
immediately. When damage on fixing occurs, often, pallet rail is
also damaged. If the damage is limited to hole enlargement,
replacement with new fixing using a large washer may be
adequate. If tearing of the hole occurs, do not reuse the hole as
repositioning of the fixing hole will be required.
Rail
Damage:
Replace the rail when damage occurs due to buckling, twisting and
serious multiple tearing of fixing holes.
Permanent Set: If the rail is permanently deformed when unloaded it has been
overloaded. A straightness tolerance in vertical direction of 1 in 800
is permitted. If the unloaded beam has set more than SPAN/800, it
must be replaced.
Similarly, a tolerance of SPAN/500 is permitted in the horizontal
direction.